DIXELL XR30CX-5N1C COMMERCIAL FRIDGE CHILLER COOL ROOM FRIDGE DIGITAL CONTROLLER
Dixell temperature controller 1.Innovative digital controllers dedicated to heat and M.T.-L.T. refrigeration 2.Easy and intuitive programming mode 3.Display with icons and integrated measurement units 4,On/off key 5.Plastic front frame with "cut out" "WING" compatible 6.Up to 2 light switches 7.Energy saving cycles through digital input 8.Fast freezing with dedicated set point 9.Regulation stop through auxiliary probe 10.Regulation restart with door open alarm 11.Temperature or HACCP Max and Min function 12.Configurable digital input also as probe 13.Virtual probe management 14.Conderser temperature management to prevent critical plant situations 15.Hot key connector for a quick and easy programming 16.Serial line connection to monitoring systems 17.Connection for X-REP remote display(alternative to TTL output) 18.3VA max power absoraption 19.Display with red LED(10,5mm high) and icons XR20CX : Digital Dixell controller for N.T. with "off cycle" defrost XR30CX: Digital Dixell controller for N.T. with "off cycle" defrost and additional configurable reply XR40CX: Digital Dixell controller for M.T. and L.T. with electrical or hot gas defrost XR60CX: Digital Dixell controller for M.T. and L.T. ventilated application with dual humidity function Main technical parameters of Dixell electronic controller
|
Model XR30CX, format 32 x 74 mm, is a digital thermostat with off cycle defrost designed for
refrigeration applications at normal temperature. It provides two relay outputs, one for the
compressor, the other one can be used as light, for alarm signalling or as auxiliary output.. It
is also provided with 2 NTC or PTC probe inputs, the first one for temperature control, the
second one, optional, to connect to the HOT KEY terminals to signal the condenser
temperature alarm or to display a temperature. The digital input can operate as third
temperature probe. It’s provided with a Real Time Clock which allows programming of up to 6
daily defrost cycles, divided into holidays and workdays. A “Day and Night” function with two
different set points is fitted for energy saving
The HOT KEY output allows to connect the unit, by means of the external module XJ485-CX,
to a network line ModBUS-RTU compatible such as the dIXEL monitoring units of X-WEB
family. It allows to program the controller by means the HOT KEY programming keyboard.
The instrument is fully configurable through special parameters that can be easily
programmed through the keyboard.